Transparent epoxy resin
Priming is necessary if the next coat is not applied within 24 hours. After the material hardens, any loose sand should be removed. Before applying a coating system to the treated surface, the primer must be cured tack-free. If the first coat of EP MultiUse does not create a closed surface, it is necessary to apply a second coat of EP MultiUse within 24 hours.
Waiting times between labor runs
The waiting time between priming and the coating or synthetic resin mortar to be applied later is ± 16 hours (at 20°C). High temperatures shorten, low temperatures lengthen the waiting time between labor runs.
Safety measures
When processing EP MultiUse, the occupational health and safety regulations of the trade association and the E.G. safety regulations of the manufacturer must be observed.
Specifications
| Type of material | 2-component transparent epoxy resin. |
| Solids content | 100% |
| Viscosity (23°C) comp. A | ± 700 mPa.s |
| Viscosity (23°C) comp. B | ± 120 mPa.s |
| Processing time (20°C) | ± 30 – 40 minutes |
| Processing temperature | minimum 8°C (optimal between 15 – 25°C) |
| Compressive strength | ± 70 – 80 N/mm² |
| Bending tensile strength | ± 80 – 90 N/mm² |
| Adhesion strength | > 3.0 N/mm² (fracture in concrete) |
| Packing size | 5 kg, 10 kg (including staples + quartz sand) |
| Storage and shelf life | Store cool, dry and frost-free. Minimum shelf life of 1 year in a tightly closed container. |
| Consumption | ± 0.5 kg/m² |
Curing times
| After ± 16 hours | Walkable |
| After ± 1 day | Mechanically loadable |
| After ± 7 days | Chemically resistant |
